Distribution of primes in smooth moduli

A key input to Zhang's proof that bounded gaps occur infinitely often is a distribution result on primes in smooth moduli, which we have called [math]\displaystyle{ MPZ[\varpi,\delta] }[/math] (and later strengthened to [math]\displaystyle{ MPZ'[\varpi,\delta] }[/math]. These estimates are obtained as a combination of three other estimates, which we will call [math]\displaystyle{ Type_I[\varpi,\delta,\sigma] }[/math], [math]\displaystyle{ Type_{II}[\varpi,\delta] }[/math], and [math]\displaystyle{ Type_{III}[\varpi,\delta,\sigma] }[/math].

Definitions

Asymptotic notation

[math]\displaystyle{ x }[/math] is a parameter going off to infinity, and all quantities may depend on [math]\displaystyle{ x }[/math] unless explicitly declared to be "fixed". The asymptotic notation [math]\displaystyle{ O(), o(), \ll }[/math] is then defined relative to this parameter. A quantity [math]\displaystyle{ q }[/math] is said to be of polynomial size if one has [math]\displaystyle{ q = O(x^{O(1)}) }[/math], and bounded if [math]\displaystyle{ q=O(1) }[/math]. We also write [math]\displaystyle{ X \lessapprox Y }[/math] for [math]\displaystyle{ X \ll x^{o(1)} Y }[/math], and [math]\displaystyle{ \displaystyle X \sim Y }[/math] for [math]\displaystyle{ X \ll Y \ll X }[/math].

Coefficient sequences

We need a fixed quantity [math]\displaystyle{ A_0\gt 0 }[/math].

A coefficient sequence is a finitely supported sequence [math]\displaystyle{ \alpha: {\mathbf N} \rightarrow {\mathbf R} }[/math] that obeys the bounds

[math]\displaystyle{ \displaystyle |\alpha(n)| \ll \tau^{O(1)}(n) \log^{O(1)}(x) }[/math]

• If [math]\displaystyle{ \alpha }[/math] is a coefficient sequence and [math]\displaystyle{ a\ (q) = a \hbox{ mod } q }[/math] is a primitive residue class, the (signed) discrepancy [math]\displaystyle{ \Delta(\alpha; a\ (q)) }[/math] of [math]\displaystyle{ \alpha }[/math] in the sequence is defined to be the quantity

[math]\displaystyle{ \displaystyle \Delta(\alpha; a \ (q)) := \sum_{n: n = a\ (q)} \alpha(n) - \frac{1}{\phi(q)} \sum_{n: (n,q)=1} \alpha(n). }[/math]

• A coefficient sequence [math]\displaystyle{ \alpha }[/math] is said to be at scale [math]\displaystyle{ N }[/math] for some [math]\displaystyle{ N \geq 1 }[/math] if it is supported on an interval of the form [math]\displaystyle{ [(1-O(\log^{-A_0} x)) N, (1+O(\log^{-A_0} x)) N] }[/math].

• A coefficient sequence [math]\displaystyle{ \alpha }[/math] at scale [math]\displaystyle{ N }[/math] is said to obey the Siegel-Walfisz theorem if one has

[math]\displaystyle{ \displaystyle | \Delta(\alpha 1_{(\cdot,q)=1}; a\ (r)) | \ll \tau(qr)^{O(1)} N \log^{-A} x }[/math]

for any [math]\displaystyle{ q,r \geq 1 }[/math], any fixed [math]\displaystyle{ A }[/math], and any primitive residue class [math]\displaystyle{ a\ (r) }[/math].

• A coefficient sequence [math]\displaystyle{ \alpha }[/math] at scale [math]\displaystyle{ N }[/math] is said to be smooth if it takes the form [math]\displaystyle{ \alpha(n) = \psi(n/N) }[/math] for some smooth function [math]\displaystyle{ \psi: {\mathbf R} \rightarrow {\mathbf C} }[/math] supported on [math]\displaystyle{ [1-O(\log^{-A_0} x), 1+O(\log^{-A_0} x)] }[/math] obeying the derivative bounds

[math]\displaystyle{ \displaystyle \psi^{(j)}(t) = O( \log^{j A_0} x ) }[/math]

for all fixed [math]\displaystyle{ j \geq 0 }[/math] (note that the implied constant in the [math]\displaystyle{ O() }[/math] notation may depend on [math]\displaystyle{ j }[/math]).

Congruence class systems

Let [math]\displaystyle{ I \subset {\mathbf R} }[/math], and let [math]\displaystyle{ {\mathcal S}_I }[/math] denote the square-free numbers whose prime factors lie in [math]\displaystyle{ I }[/math].

• A singleton congruence class system on [math]\displaystyle{ I }[/math] is a collection [math]\displaystyle{ {\mathcal C} = (\{a_q\})_{q \in {\mathcal S}_I} }[/math] of primitive residue classes [math]\displaystyle{ a_q \in ({\mathbf Z}/q{\mathbf Z})^\times }[/math] for each </math>q \in {\mathcal S}_I</math>, obeying the Chinese remainder theorem property

[math]\displaystyle{ \displaystyle a_{qr}\ (qr) = (a_q\ (q)) \cap (a_r\ (r)) }[/math]

whenever [math]\displaystyle{ q,r \in {\mathcal S}_I }[/math] are coprime. We say that such a system [math]\displaystyle{ {\mathcal C} }[/math] has controlled multiplicity if the quantity

[math]\displaystyle{ \displaystyle \tau_{\mathcal C}(n) := |\{ q \in {\mathcal S}_I: n = a_q\ (q) \}| }[/math]

obeys the estimate

[math]\displaystyle{ \displaystyle \sum_{C^{-1} x \leq n \leq Cx: n = a\ (r)} \tau_{\mathcal C}(n)^2 \ll \frac{x}{r} \tau(r)^{O(1)} \log^{O(1)} x + x^{o(1)}. }[/math]

for any fixed [math]\displaystyle{ C \gt 1 }[/math] and any congruence class [math]\displaystyle{ a\ (r) }[/math] with [math]\displaystyle{ r \in {\mathcal S}_I }[/math]. Here [math]\displaystyle{ \tau }[/math] is the divisor function.

Smooth and densely divisible numbers

A natural number [math]\displaystyle{ n }[/math] is said to be [math]\displaystyle{ y }[/math]-smooth if all of its prime factors are less than or equal to [math]\displaystyle{ y }[/math]. We say that [math]\displaystyle{ n }[/math] is [math]\displaystyle{ y }[/math]-densely divisible if, for every [math]\displaystyle{ 1 \leq R \leq n }[/math], one can find a factor of [math]\displaystyle{ n }[/math] in the interval [math]\displaystyle{ [y^{-1} R, R] }[/math]. Note that [math]\displaystyle{ y }[/math]-smooth numbers are automatically [math]\displaystyle{ y }[/math]-densely divisible, but the converse is not true in general.

MPZ

Let [math]\displaystyle{ 0 \lt \varpi \lt 1/4 }[/math] and [math]\displaystyle{ 0 \lt \delta \lt \varpi + 1/4 }[/math] be fixed. Let [math]\displaystyle{ \Lambda }[/math] denote the von Mangoldt function.

• We say that the estimate [math]\displaystyle{ MPZ[\varpi,\delta] }[/math] holds if one has the estimate

[math]\displaystyle{ \displaystyle \sum_{q \in {\mathcal S}_I: q\lt x^{1/2+2\varpi}} |\Delta(\Lambda 1_{[x,2x]}; a_q)| \ll x \log^{-A} x }[/math]

for any fixed [math]\displaystyle{ A \gt 0 }[/math], any [math]\displaystyle{ I \subset [1,x^\delta] }[/math], and any congruence class system [math]\displaystyle{ (\{a_q\})_{q \in {\mathcal S}_I} }[/math] of controlled multiplicity.

• We say that the estimate [math]\displaystyle{ MPZ'[\varpi,\delta] }[/math] holds if one has the estimate

[math]\displaystyle{ \displaystyle \sum_{q \in {\mathcal S}_I \cap {\mathcal D}_{x^\delta}: q\lt x^{1/2+2\varpi}} |\Delta(\Lambda 1_{[x,2x]}; a_q)| \ll x \log^{-A} x }[/math]

for any fixed [math]\displaystyle{ A \gt 0 }[/math], any [math]\displaystyle{ I \subset {\mathbf R} }[/math], and any congruence class system [math]\displaystyle{ (\{a_q\})_{q \in {\mathcal S}_I} }[/math] of controlled multiplicity.

Type I, Type II, and Type III

Let [math]\displaystyle{ 0 \lt \varpi \lt 1/4 }[/math], [math]\displaystyle{ 0 \lt \delta \lt 1/4+\varpi }[/math], and [math]\displaystyle{ 0 \lt \sigma \lt 1/2 }[/math] be fixed.

• We say that [math]\displaystyle{ Type_I[\varpi,\delta,\sigma] }[/math] holds if, whenever [math]\displaystyle{ M,N }[/math] are quantities with

[math]\displaystyle{ \displaystyle MN \sim x }[/math]

and

[math]\displaystyle{ \displaystyle x^{1/2-\sigma} \ll N \ll x^{1/2-2\varpi-c} }[/math]

or equivalently

[math]\displaystyle{ \displaystyle x^{1/2+2\varpi+c} \ll M \ll x^{1/2+\sigma} }[/math]

for some fixed [math]\displaystyle{ c\gt 0 }[/math], and [math]\displaystyle{ \alpha,\beta }[/math] are coefficient sequences at scale [math]\displaystyle{ M,N }[/math] respectively with [math]\displaystyle{ \beta }[/math] obeying a Siegel-Walfisz theorem, [math]\displaystyle{ I \subset [1,x^\delta] }[/math], and [math]\displaystyle{ (\{a_q\})_{q \in {\mathcal S}_I} }[/math] is a congruence class system of controlled multiplicity, then one has

[math]\displaystyle{ \sum_{q \in {\mathcal S}_I: q \lt x^{1/2+2\varpi}} |\Delta( \alpha * \beta; a_q\ (q))| \leq x \log^{-A} x }[/math]

for all fixed [math]\displaystyle{ A\gt 0 }[/math].

• We say that [math]\displaystyle{ Type_{II}[\varpi,\delta] }[/math] holds if, whenever [math]\displaystyle{ M,N }[/math] are quantities with

[math]\displaystyle{ \displaystyle MN \sim x }[/math]

and

[math]\displaystyle{ \displaystyle x^{1/2-2\varpi-c} \ll N \ll x^{1/2} }[/math]

or equivalently

[math]\displaystyle{ \displaystyle x^{1/2} \ll M \ll x^{1/2+2\varpi+c} }[/math]

for some sufficiently small fixed [math]\displaystyle{ c\gt 0 }[/math], and [math]\displaystyle{ \alpha,\beta }[/math] are coefficient sequences at scale [math]\displaystyle{ M,N }[/math] respectively with [math]\displaystyle{ \beta }[/math] obeying a Siegel-Walfisz theorem, [math]\displaystyle{ I \subset [1,x^\delta] }[/math], and [math]\displaystyle{ (\{a_q\})_{q \in {\mathcal S}_I} }[/math] is a congruence class system of controlled multiplicity, then one has

[math]\displaystyle{ \sum_{q \in {\mathcal S}_I: q \lt x^{1/2+2\varpi}} |\Delta( \alpha * \beta; a_q\ (q))| \leq x \log^{-A} x }[/math]

for all fixed [math]\displaystyle{ A\gt 0 }[/math].

• We say that [math]\displaystyle{ Type_{III}[\varpi,\delta,\sigma] }[/math] holds if, whenever [math]\displaystyle{ M,N_1,N_2,N_3 }[/math] are quantities with

[math]\displaystyle{ \displaystyle MN \sim x }[/math]

[math]\displaystyle{ \displaystyle N_1N_2, N_2 N_3, N_1 N_3 \gg x^{1/2 + \sigma} }[/math]

[math]\displaystyle{ \displaystyle x^{2\sigma} \ll N_1,N_2,N_3 \ll x^{1/2-\sigma}, }[/math]

[math]\displaystyle{ \alpha,\psi_1,\psi_2,\psi_3 }[/math] are coefficient sequences at scale [math]\displaystyle{ M,N_1,N_2,N_3 }[/math] respectively with [math]\displaystyle{ \psi_1,\psi_2,\psi_3 }[/math] smooth, [math]\displaystyle{ I \subset [1,x^\delta] }[/math], and [math]\displaystyle{ (\{a_q\})_{q \in {\mathcal S}_I} }[/math] is a congruence class system of controlled multiplicity, then one has

[math]\displaystyle{ \sum_{q \in {\mathcal S}_I: q \lt x^{1/2+2\varpi}} |\Delta( \alpha * \psi_1 * \psi_2 * \psi_3; a_q\ (q))| \leq x \log^{-A} x }[/math]

for all fixed [math]\displaystyle{ A\gt 0 }[/math].

• We define [math]\displaystyle{ Type'_I[\varpi,\delta,\sigma] }[/math], [math]\displaystyle{ Type'_{II}[\varpi,\delta] }[/math], [math]\displaystyle{ Type_{III}[\varpi,\delta,\sigma] }[/math] analogously to [math]\displaystyle{ Type_I[\varpi,\delta,\sigma] }[/math], [math]\displaystyle{ Type_{II}[\varpi,\delta] }[/math], [math]\displaystyle{ Type_{III}[\varpi,\delta,\sigma] }[/math] but with the hypothesis [math]\displaystyle{ I \subset [1,x^\delta] }[/math] replaced with [math]\displaystyle{ I \subset \mathbf{R} }[/math], and [math]\displaystyle{ {\mathcal S}_I }[/math] replaced with [math]\displaystyle{ {\mathcal S}_I \cap {\mathcal D}_{x^\delta} }[/math]. These estimates are slightly stronger than their unprimed counterparts.

There should also be a second "double-primed" variant [math]\displaystyle{ Type''_I[\varpi,\delta,\sigma], Type''_{II}[\varpi,\delta], Type''_{III}[\varpi,\delta,\sigma] }[/math] of these estimates, intermediate in strength between the primed and unprimed estimates, in which one assumes a suitable "double dense divisibility" hypothesis, which has not yet been determined precisely.

Note: thus far in the Type III analysis, the controlled multiplicity hypothesis has yet to be used.

The combinatorial lemma

Combinatorial lemma Let [math]\displaystyle{ 0 \lt \varpi \lt 1/4 }[/math], [math]\displaystyle{ 0 \lt \delta \lt 1/4 + \varpi }[/math], and [math]\displaystyle{ 1/10 \lt \sigma \lt 1/12 }[/math] be fixed.

• If [math]\displaystyle{ Type_I[\varpi,\delta,\sigma] }[/math], [math]\displaystyle{ Type_{II}[\varpi,\delta] }[/math], and [math]\displaystyle{ Type_{III}[\varpi,\delta,\sigma] }[/math] all hold, then [math]\displaystyle{ MPZ[\varpi,\delta] }[/math] holds.
• Similarly, if [math]\displaystyle{ Type'_I[\varpi,\delta,\sigma] }[/math], [math]\displaystyle{ Type'_{II}[\varpi,\delta] }[/math], and [math]\displaystyle{ Type'_{III}[\varpi,\delta,\sigma] }[/math] all hold, then [math]\displaystyle{ MPZ'[\varpi,\delta] }[/math] holds.

This lemma is (somewhat implicitly) proven here. It reduces the verification of [math]\displaystyle{ MPZ[\varpi,\delta] }[/math] and [math]\displaystyle{ MPZ'[\varpi,\delta] }[/math] to a comparison of the best available Type I, Type II, and Type III estimates, as well as the constraint [math]\displaystyle{ \sigma \gt 1/10 }[/math].

Type I estimates

In all of the estimates below, [math]\displaystyle{ 0 \lt \varpi \lt 1/4 }[/math], [math]\displaystyle{ 0 \lt \delta \lt 1/4 + \varpi }[/math], and [math]\displaystyle{ \sigma \gt 0 }[/math] are fixed.

Level 1

Type I-1 We have [math]\displaystyle{ Type'_I[\varpi,\delta,\sigma] }[/math] (and hence [math]\displaystyle{ Type_I[\varpi,\delta,\sigma] }[/math]) whenever

[math]\displaystyle{ \displaystyle 11\varpi +3\delta + 2 \sigma \lt \frac{1}{4} }[/math].

This result is implicitly proven here. (There, only [math]\displaystyle{ Type_I[\varpi,\delta,\sigma] }[/math] is proven, but the method extends without difficulty to [math]\displaystyle{ Type'_I[\varpi,\delta,\sigma] }[/math].) It uses the method of Zhang, and is ultimately based on exponential sums for incomplete Kloosterman sums on smooth moduli obtained via completion of sums.

Level 2

Type I-2 We have [math]\displaystyle{ Type'_I[\varpi,\delta,\sigma] }[/math] (and hence [math]\displaystyle{ Type_I[\varpi,\delta,\sigma] }[/math]) whenever

[math]\displaystyle{ \displaystyle 14\varpi +4\delta + \sigma \lt \frac{1}{4} }[/math]

and

[math]\displaystyle{ \displaystyle 20\varpi +6\delta + 3\sigma \lt \frac{1}{2} }[/math]

and

[math]\displaystyle{ \displaystyle 32\varpi +9\delta + \sigma \lt \frac{1}{2} }[/math].

This estimate is implicitly proven here. It improves upon the Level 1 estimate by using the q-van der Corput A-process in the [math]\displaystyle{ d_2 }[/math] direction.

Level 3

Type I-3 We have [math]\displaystyle{ Type'_I[\varpi,\delta,\sigma] }[/math] (and hence [math]\displaystyle{ Type_I[\varpi,\delta,\sigma] }[/math]) whenever

[math]\displaystyle{ \displaystyle 54\varpi + 15 \delta + 5 \sigma \lt 1 }[/math]

and

[math]\displaystyle{ \displaystyle 32\varpi +9\delta + \sigma \lt \frac{1}{2} }[/math].

This estimate is tentatively established in this comment. It improves upon the Level 2 estimate by taking advantage of dense divisibility to optimise the direction of averaging.

Level 4

By iterating the q-van der Corput A-process, one should be able to obtain [math]\displaystyle{ Type''_I[\varpi,\delta,\sigma] }[/math] assuming a constraint of the form

[math]\displaystyle{ \displaystyle 40\varpi + C \delta + 4 \sigma \lt 1 }[/math]

for some constant C that has not yet been determined (in part because we have not yet decided what "doubly densely divisible" means); see this comment.

Level 5

Further improvement to the (still sketchy) Level 4 estimate should be obtainable by taking advantage of averaging in auxiliary "h" parameters in order to reduce the contribution of the diagonal terms.

Type II estimates

In all of the estimates below, [math]\displaystyle{ 0 \lt \varpi \lt 1/4 }[/math] and [math]\displaystyle{ 0 \lt \delta \lt 1/4 + \varpi }[/math] are fixed.

Level 1

Type II-1 We have [math]\displaystyle{ Type'_{II}[\varpi,\delta] }[/math] (and hence [math]\displaystyle{ Type_{II}[\varpi,\delta] }[/math]) whenever

[math]\displaystyle{ \displaystyle 58\varpi + 10\delta \lt \frac{1}{2} }[/math].

This estimate is implicitly proven here. (There, only [math]\displaystyle{ Type_I[\varpi,\delta,\sigma] }[/math] is proven, but the method extends without difficulty to [math]\displaystyle{ Type'_I[\varpi,\delta,\sigma] }[/math].) It uses the method of Zhang, and is ultimately based on exponential sums for incomplete Kloosterman sums on smooth moduli obtained via completion of sums.

Level 1a

Type II-1a We have [math]\displaystyle{ Type'_{II}[\varpi,\delta] }[/math] (and hence [math]\displaystyle{ Type_{II}[\varpi,\delta] }[/math]) whenever

[math]\displaystyle{ \displaystyle 48\varpi + 7\delta \lt \frac{1}{2} }[/math].

This estimate is implicitly proven here. It is a slight refinement of the Level 1 estimate based on a more careful inspection of the error terms in the completion of sums method.

Level 2

In analogy with the Type I-2 estimates, one should be able to improve the Type II estimates by using the q-van der Corput process in the [math]\displaystyle{ d_2 }[/math] direction.

Level 3

In analogy with the Type I-3 estimates, one should be able to improve the Type II estimates by using the q-van der Corput process in an optimised direction.

Level 4

In analogy with the Type I-4 estimates, one should be able to improve the Type II estimates by iterating the q-van der Corput A-process.

Level 5

In analogy with the Type I-5 estimates, one should be able to improve the Type II estimates by taking advantage of averaging in the h parameters.

Type III estimates

In all of the estimates below, [math]\displaystyle{ 0 \lt \varpi \lt 1/4 }[/math], [math]\displaystyle{ 0 \lt \delta \lt 1/4 + \varpi }[/math], and [math]\displaystyle{ \sigma \gt 0 }[/math] are fixed.

Level 1

Type III-1 We have [math]\displaystyle{ Type'_{III}[\varpi,\delta,\sigma] }[/math] (and hence [math]\displaystyle{ Type_{III}[\varpi,\delta,\sigma] }[/math]) whenever

[math]\displaystyle{ \displaystyle \frac{13}{2} (\frac{1}{2} + \sigma) \gt 8 (\frac{1}{2} + 2 \varpi) + \delta }[/math]

This estimate is implicitly proven here. (There, only [math]\displaystyle{ Type_{III}[\varpi,\delta,\sigma] }[/math] is proven, but the method extends without difficulty to [math]\displaystyle{ Type'_{III}[\varpi,\delta,\sigma] }[/math].) It uses the method of Zhang, using Weyl differencing and not exploiting the averaging in the [math]\displaystyle{ \alpha }[/math] or [math]\displaystyle{ q }[/math] parameters. The constraint can also be written as a lower bound on [math]\displaystyle{ \sigma }[/math]:

[math]\displaystyle{ \displaystyle \sigma \gt \frac{3}{26} + \frac{32}{13} \varpi + \frac{2}{13} \delta }[/math].

Level 2

Type III-2 We have [math]\displaystyle{ Type'_{III}[\varpi,\delta,\sigma] }[/math] (and hence [math]\displaystyle{ Type_{III}[\varpi,\delta,\sigma] }[/math]) whenever

[math]\displaystyle{ \displaystyle 1 + 5 (\frac{1}{2} + \sigma) \gt 8 (\frac{1}{2} + 2 \varpi) + \delta }[/math]

This estimate is implicitly proven here. It is a refinement of the Level 1 estimate that takes advantage of the [math]\displaystyle{ \alpha }[/math] averaging. The constraint may also be written as a lower bound on [math]\displaystyle{ \sigma }[/math]:

[math]\displaystyle{ \displaystyle \sigma \gt \frac{1}{10} + \frac{16}{5} \varpi + \frac{1}{5} \delta }[/math].

Level 3

Type III-3 We have [math]\displaystyle{ Type'_{III}[\varpi,\delta,\sigma] }[/math] (and hence [math]\displaystyle{ Type_{III}[\varpi,\delta,\sigma] }[/math]) whenever

[math]\displaystyle{ \displaystyle 3 (\frac{1}{2} + \sigma) \gt \frac{7}{4} (\frac{1}{2} + 2 \varpi) + \frac{3}{8} \delta }[/math].

This estimate is proven in this comment. It uses the newer method of Fouvry, Kowalski, Michel, and Nelson that avoids Weyl differencing. The constraint may also be written as a lower bound on [math]\displaystyle{ \sigma }[/math]:

[math]\displaystyle{ \displaystyle \sigma \gt \frac{1}{12} + \frac{7}{3} \varpi + \frac{1}{4} \delta }[/math].

Level 4

It should be possible to improve upon the Level 3 estimate by exploiting averaging in the [math]\displaystyle{ \alpha }[/math] parameter (this was suggested already by Fouvry, Kowalski, Michel, and Nelson).

Combinations

Type I	Type II	Type III	Result	Details	Notes
Level 1	Level 1	Level 1	[math]\displaystyle{ 207\varpi + 43\delta \lt 1/4 }[/math]	details
Level 1	Level 1	Level 2	[math]\displaystyle{ 87\varpi + 17\delta \lt 1/4 }[/math]	details
Level 2	Level 1a	Level 1	[math]\displaystyle{ 178\varpi + 52\delta \lt 1 }[/math]	details
Level 2	Level 1a	Level 2	[math]\displaystyle{ 148\varpi + 33\delta \lt 1 }[/math]	details
Level 3?	Level 1a	Level 2	[math]\displaystyle{ 140 \varpi + 32\delta \lt 1 }[/math]?	details
Level 4?	Level 1a	Level 1	[math]\displaystyle{ 96\varpi + C \delta \lt 1 }[/math]?	details
Level 4?	Level 2?	Level 1	[math]\displaystyle{ 88\varpi + C \delta \lt 1 }[/math]?	details
Level 4?	Level 2?	Level 2	[math]\displaystyle{ 74\varpi + C \delta \lt 1 }[/math]?	details
Level 2	Level 1a	Level 3	[math]\displaystyle{ 116\varpi + 30 \delta \lt 1 }[/math]	details